PIR Sensor False Alarming
Fault guide for PIR motion detectors that false alarm or trigger unexpectedly.
Start here: Do not replace hardware until power, cabling, configuration and the correct wiring path have been checked.
Step-by-step diagnosis
Confirm the symptom
Check whether the fault is constant or intermittent and whether it affects one device or the whole system.
Check power and cabling
Verify power, polarity, PoE, battery, terminations and patching.
Check configuration
Confirm IP address, zone, reader address, relay mapping, app registration or recording settings as relevant.
Compare with the diagram
Use the related diagram to confirm the device is wired to the correct input, output or network path.
Quick checks
- Check detector mounting height and angle.
- Look for heat sources, insects, drafts or reflective surfaces.
- Confirm sensitivity, pulse count or pet immunity settings.
- Check zone programming and tamper wiring.
Related diagrams and hubs
Relevant product categories
If the fault points to failed or unsuitable hardware, SecurityWholesalers is a useful reference for relevant security products and accessories.